Long carbon fiber Reinforced Polyamide nylon PA66 repared by solution impregnation process. Long carbon fiber reinforced PA66 typical application range of automotive parts, mechanical parts, electrical and electronic products, engineering accessories and other products.
-
LFT-G PA66 Nylon66 compound Long Carbon Fiber 20%-60% higher performance injection moldingPolyamide series Nylon is the common name of polyamide (PA), is the general term for thermoplastic resins containing repeated amide groups on the main chain of the molecule, including aliphatic polyamide, aliphatic aromatic polyamide and aromatic polyamide. As the first of the five engineering plastics, nylon has an extremely wide range of industrial applications, mainly used in automotive parts, mechanical parts, electronic and electrical appliances, cosmetics, adhesives and packaging materials and other fields. Among them, aliphatic polyamide, mainly nylon 66, is the most productive and widely used. Polyamide66 Nylon 66 (PA66) is a kind of polyamide formed by the condensation of adipic acid and adipdiamine. The molecular formula is shown in the figure Advantages: high strength, corrosion resistance, good wear resistance, and has self-lubrication, flame retardant, non-toxic environmental protection and other excellent performance. Disadvantages: poor heat and acid resistance, low impact strength in dry state and low temperature, water absorption greatly affects the dimensional stability and electrical properties of products. Long carbon fiber filling PA6 Long carbon fiber is an inorganic polymer material with more than 90% carbon content, which is obtained by carbonization and graphitization of organic fibers. The microstructure of long carbon fiber is similar to that of artificial graphite (C atoms arranged in layers). Advantages: light weight, high strength, high modulus, high temperature resistance, wear resistance, corrosion resistance, fatigue resistance, electrical and thermal conductivity, etc. Disadvantages: high cost, relatively difficult to infiltrate, poor transparency, defects difficult to check, etc. According to the source of carbon fiber, long carbon fiber can be divided into: Polyacrylonitrile-based long carbon fiber Asphaltic long carbon fiber Viscosified long carbon fiber Long carbon fiber composite material is a very useful structural material, it is not only light, high temperature resistance, but also has a high tensile strength and elastic modulus, is the manufacturing of spacecraft, rockets, missiles, high-speed aircraft and large passenger aircraft indispensable components of the material. It is also widely used in transportation, chemical industry, metallurgy, construction and other industrial sectors as well as sports equipment. Datasheet for reference The density of A66/CF composite material is less than 1.3, which is less than one sixth of the density of steel (7.85), achieving the purpose of lightweight, which is conducive to energy saving and consumption reduction. In the PA66/CF composite system, the length of CF is about 0.5 ~ 0.7mm, the interface between PA66 matrix and carbon fiber is fully combined, and nylon 66 is well wrapped around carbon fiber. The fracture surface of PA66/CF sample is rough, and the PA66/CF composite is a ductile material. Compared with PA66, the mechanical properties of PA66/CF composites are significantly improved. Trade fairs we attended Xiamen LFT composite plastic Co., Ltd. is a brand-name company that focuses on LFT&LFRT. Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). The company's thermoplastic LFT can be used for LFT-G injection molding and extrusion, and can also be used for LFT-D molding. It can be produced according to customer requirements: 5~25mm in length. The company's long-fiber continuous infiltration reinforced thermoplastics have passed ISO9001&16949 system certification, and the products have obtained lots of national trademarks and lots of patents.
- "LFT composite"
- long carbon fiber polyamide pa66
- carbon fiber reinforced plastics granules
- long fiber compounds pa66
- pa66 lcf30
- long fiber composite pa66 granules
Tags :
-
PA66 Polyamide66 natural black filled lcf long carbon fiber made in China high qualityPA66 Nylon (PA) has a series of excellent properties, such as high mechanical strength, chemical resistance, oil resistance, wear resistance, self-lubrication, easy processing and forming, and has become one of the thermoplastic engineering plastics widely used at home and abroad. But in the practical application, the performance requirements of nylon are different under different conditions or environment. For example, electric drill and motor shell, pump impeller, bearing, diesel engine and air conditioning fan and other parts require nylon material to have high strength, high rigidity and high dimensional stability; Because of the poor toughness of nylon at low temperature, it is necessary to toughen it. In some outdoor applications, nylon materials must be weather-resistant modification in long-term outdoor environment. PA66-LCF Long carbon fiber reinforced nylon has excellent damping properties in 3D printing and has better performance than glass fiber reinforced nylon. In the design of tools for industrial applications, traditional techniques have used aluminum or alternative metal alloys because metal components perform better and meet the requirements of the tool. In many cases, thermoplastics can meet the strength requirements of such tools, but not the rigidity requirements for performing test tasks. Carbon fiber reinforced nylon is an ideal substitute for metal. Due to the combination of the light weight of nylon and the mechanical strength and thermal properties of carbon fiber, the strength and stiffness of carbon fiber composite nylon material is significantly improved, and its mechanical strength even exceeds that of 3D-printed PEEK and PEKK. In the automobile industry, from internal and external components such as vehicle anchors and instruments to engine housing, metal parts can be replaced. As we all know, automotive carbon fiber is widely used in automobile manufacturing due to its strong thermal and mechanical properties. As a substitute for metal parts, carbon fiber reinforced nylon has a wide range of application prospects in the automobile industry, which can realize the possibility of weight reduction and design optimization, as well as environmental protection and economic advantages. TDS Application Package Patents
- PA66 composite fiber
- PA66 resin compound
- LFT-G brand plastic
- PA66 LCF carbon
- new plastic material fiber
- High performance lcf
Tags :
-
Nylon 66 high performance PA66 long carbon fiber composite materials for aerospace filedsWhat is PA66 plastic? Polyadipyladipylenediamine, commonly known as nylon -66, is a thermoplastic resin, generally made from adiponic acid and hexadipamine condensation. Insoluble in general solvents, only soluble in m-cresol, etc. High mechanical strength and hardness, rigidity. It can be used as engineering plastics, mechanical accessories such as gears, lubricating bearings, instead of non-ferrous metal materials to make machine shells, automotive engine blades, and can also be used to make synthetic fibers. PA66 plastic raw material is translucent or opaque opalescent crystalline polymer, with plasticity. Density 1.15g/cm3. Melting point 252℃. Embrittlement temperature -30℃. Thermal decomposition temperature is greater than 350℃. Continuous heat resistance 80-120℃, balanced water absorption rate of 2.5%. Resistant to acid, alkali, most aqueous inorganic salts, alkyl halides, hydrocarbons, esters, ketones and other corrosion, but easy to phenol, formic acid and other polar solvents. It has excellent wear resistance, self lubricity and high mechanical strength. But the water absorption is larger, so the dimensional stability is poor. What is Long Carbon Fiber? In the modified engineering plastics industry, long fiber reinforced composite material refers to long carbon fiber, long glass fiber, aramid fiber or basalt fiber and polymer matrix, through a series of special modification methods to produce composite materials. The biggest characteristic of long fiber composites is that they have superior properties that the original materials do not have. If they are classified according to the length of the added reinforcement materials, they can be divided into long fiber, short fiber and continuous fiber composites. As mentioned in the beginning, long carbon fiber composite material is a kind of long fiber reinforced composite material, which is a new fiber material with high strength and high modulus fiber. LCF carbon fiber composite exhibits high strength along the fiber axis, and has the characteristics of high strength and light weight. It has the comprehensive mechanical properties such as density, specific strength and specific modulus that are incomparable to other materials. It is a new material with excellent mechanical properties and many special functions. What are the properties of Long Carbon fiber? Corrosion resistance: LCF carbon fiber composite material has good corrosion resistance, can adapt to harsh working environment; Uv resistance: strong ability to resist UV, products by UV damage problem is small; Wear resistance and impact resistance: compared with the general material advantage is more obvious; Low density: lower than the density of many metal materials, can achieve the purpose of lightweight; Other properties: such as reducing warpage, improving rigidity, impact modification, increasing toughness, electrical conductivity and so on. Compared with glass fiber, LCF carbon fiber composite has higher strength, higher rigidity, lower weight, and excellent electrical conductivity. What is the application fileds of PA66-LCF? 1. Military industry LFT long carbon fiber composite has very high specific strength and stiffness, and has the characteristics of corrosion resistance, fatigue resistance, high temperature resistance and low thermal expansion coefficient, etc. LCF carbon fiber composite is widely used in rocket, missile, military aircraft, personal protection and other military fields at home and abroad. Compared with conventional materials, long carbon fiber composites allow for continuous improvements in the performance of military equipment, such as reducing the weight of warships by 20 to 40 percent. At the same time, LCF carbon fiber composite material can overcome the metal material is easy to be corroded, easy to fatigue and other shortcomings, improve and enhance the durability of military products. Currently, more than 40 percent of LCF carbon fiber composite materials are used in some advanced military helicopters, and even more in unmanned aerial vehicles. In addition to aircraft, Marine warships also appear long carbon fiber composite material figure, because long carbon fiber composite material can withstand the corrosion of seawater and a variety of chemical impurities, has a long service life, more durable than steel warships, lower maintenance costs, has become an important strategic material for the development of modern defense military weapons and equipment. 2. Home appliance field LCF carbon fiber composite material has low density, good chemical resistance, excellent performance and other characteristics, has gradually become the home appliance industry's preferred modified engineering plastics, its usage accounts for about 30% and is on the rise. Moreover, home appliances are more and more intelligent and personalized, and the modified performance requirements of materials are higher. So it's no surprise that long carbon fiber composites are chosen by th...
- LFT-G brand
- polyadipyladipdiamine
- composite material
- Thermoplastic resin
- Synthetic fibre
- Instead medal material
Tags :
-
2023 hot sell Nylon66 PA66 compond long carbon fiber 40 material original colorNylon 66 is a kind of high-grade thermoplastic resin, which is an excellent polymer material for manufacturing chemical fibers and engineering plastics.
- Polyamide66
- Instead steel plastic
- Long carbon fiber
- Thermoplastics resin
- High quality pa66
- customized plastic
Tags :
-
Hot sell PA66 composite material filling long carbon fiber polyamide 66 for aerospaceProduct number: PA66-NA-LCF50 Fiber specification: 20%-60% Product feature: High toughness, Light weight, High strength, Wear reisistance, Corrosion resistance, Creep resistance, Conduction, Heat transfer Product application: The wing of the aircraft, Duck wing, Stable wing, Nacelle and other aerospace fileds.view more
-
LFT PA66 Long Carbon Fiber 20% Composite MaterialsProdcut Name:LFT PA66 Long Carbon Fiber 20% Composite Materials Certificated: SGS,FTA, and so on
- PA66 LCF20
- Carbon fiber Nylon66
- PA Carbon Fiber Thermoplastic
- PA66 30 Carbon Fiber
- Benefits of Carbon Fiber Car Parts
- Difference PA6 and PA66
Tags :
-
Polyamide 66 roving carbon fiber Nylon black color with electrical conductivityPolyamide 66 roving carbon fiber Nylon black color with heat resistance
- Long carbon fiber enhance pellets
- Roving carbon fiber PA66
- Nylon66 composite granules for injection
- High quality PA66 long fiber composite、
- Polyamide long fiber composite
- Virgin plastic PA6 LCF40
Tags :
-
pa66 long carbon fiber reinforced thermoplastic material polyamide 66 nylon resinhigh quality pa66 black material with high strength feature
- long carbon fiber reinforced polyamide nylon pa66
- long fiber reinforced pa66
- pa66 gf35 granules
- recycle thermoplastic pa66 long carbon fiber
- long fiber composites nylon66
- polyamide 66 vs nylon 66 thermoplastic granules
Tags :
-
pa66 gf35 granules polyamide nylon66 thermoplastic polymer long carbon fiber reninfocedlong carbon fiber pa66 granules recycle polyamide66 nylon pelletsview more
-
Nylon PA66 Polyamide66 factory producing engineer plastic pelletsLong carbon fiber Reinforced Polyamide (nylon) PA66 reinforced toughened nylon a modified engineering plastic
- Nylon PA66
- Polyamide66 factory
- producing engineer plastic pellets
- Reinforced toughened nylon pa66
Tags :
-
Long carbon fiber Reinforced Polyamide (nylon) PA66Long carbon fiber Reinforced Polyamide (nylon) PA66 reinforced toughened nylon a modified engineering plastic
- Polyamide PA66
- Nylon reinforced long carbon fiber
- Long carbon fiber composite Nylon 66
- Reinforced toughened nylon
Tags :