LFT-G long fiber reinforced thermoplastic material  Long-Fiber Reinforce Thermoplastic is the same as ordinary chopped fiber and PP. . PA, PET and other thermoplastics are composite materials made by extrusion, pelletizing or sheeting. This material is widely used in the automotive industry, but is rarely used in the production of FRP safety helmets. As early as the 1980s, European and American countries proposed the concept of LFT. However, due to the injection or compression molding process of long fiber pellets at that time, fiber impregnation technology and production equipment were relatively backward. At the same time, the short fiber reinforcement of thermoplastics, Great progress has been made in the research and application of filling and other modification technologies. LFT-G long fiber reinforced thermoplastic materialAs a result, the research progress of LFT technology is slow. Until the mid-1990s, with the rapid development of the automobile industry, people’s awareness of environmental protection and energy conservation, especially the energy crisis and rising oil prices, promoted the development of lightweight automobiles as a new type of automobile, and made people pay attention again. The effort turned to the research and development of LFT. LFT-G long fiber reinforced thermoplastic material LFT products are compared with ordinary fiber reinforced products. We will discuss the specific details in the next article.

In July, when the epidemic was not completely over, I could not resist the passion of the participants in the 22nd Qingdao (China) Plastics Industry Expo. Even under the scorching sun, the exhibition was still full of people, and people were in a very active state of mind. The exhibition was very lively. Xiamen LFT composite plasitc Co., Ltd. decided to participate in the Qingdao exhibition after taking into account the safety of employees and the actual situation of the exhibition. This is also the second time that our company has participated in the domestic exhibition after being tested by the epidemic.Our purpose this time is just to show you LFT modified reinforced engineering plastics!LFT modified reinforced engineering plastics series are widely used in automobile, household appliances, furniture, aerospace, machinery, military industry and other fields. LFT materials are characterized by high toughness, 94-VO flame retardant, high performance and green environment protection. If you are interested in our materials or have any questions, please contact us. We are online 24 hours a day. Welcome to our official website:www.lft-g.com

Modified long glass fiber PA6 has been improved in fiber length, strength, modulus, impact property and heat resistance.Therefore, glass fiber reinforced nylon 66 composite has excellent advantages in high strength, high toughness and creep resistance. Recently, Xiamen LFT composite plasitc Co.,ltd broke away from the traditional color or black with the release of blue long glass fibre reinforced polyamide 66, which is often referred to as custom color.When it comes to satisfying customers' needs for color selection, I believe everyone will have a question: Does color affect the performance of PA6 long fiber materials? The technicians of Long Fiber say that the major factors to be considered in color matching are the production temperature, injection temperature, raw material quality and color composition quality, etc. The effect of color on the material performance is negligible, which can maintain the excellent overall performance of the material. In a large number of experimental performance test results, the data obtained by technicians is very stable and reliable, and it is believed that more customizable colors will be introduced for customers to choose from.Long glass fiber PA6 is mainly used in automobile parts, household appliances parts, mechanical parts, sports and daily necessities. Adapt to The Times, change yourself, ensure quality, blue long fiberglass PA6, you deserve it! Color does not change the overall performance of the long FIBERglass PA6.

PA6 plastic injection process PA6 is a translucent or opaque milky white crystalline polymer. It has good thermoplasticity, light weight, good toughness, chemical resistance and durability. Because of its good mechanical strength and rigidity, it is widely used in structural components, has good wear resistance, and is also used in the manufacture of bearings. Injection molding process conditions Drying treatment: Because PA6 easily absorbs moisture, attention should be paid to drying before processing. If the material is supplied in waterproof packaging, the container should be kept closed. Humidity is greater than 0,2%, it is recommended to dry in hot air above 80 degrees for 16 hours. If the material is exposed to air for more than 8 hours, it is recommended to perform vacuum drying at 105 degrees for more than 8 hours. Melting temperature: 230-280. Mold temperature: 80-90. For thin-walled, long-process plastic parts, a higher mold temperature is also recommended. Increasing the mold temperature can increase the strength and rigidity of the plastic parts, but reduce the toughness accordingly. High-speed injection speed. The chemical and physical properties of PA6 are very similar to PA66. The melting point of PA6 is lower and the process temperature range is very wide. In order to improve the mechanical properties of PA6, various modifiers are often added, and glass is the most common additive. For products without additives. The shrinkage of PA6 is between 1% and 5%. Adding glass fiber additives can reduce the shrinkage to 0.3%. More details, please contact sale02@lfrtplastic forward.

Recently, many people have been shouting, and the melt-blown cloth has cooled. From the market data, at present, the melt-blown cloth market is still profitable, but some friends said that 10% made a profit and 90% lost money. , But bosses already in the industry should not be too discouraged. On 4/26, the Ministry of Commerce issued a notice that anti-epidemic materials production enterprises may apply to the local Commerce Bureau to join the Ministry of Commerce white list, and submit relevant forms and certification materials. The mask in January, the gasoline in February, the melt-blown cloth in March, the rice oil in April, and the helmet in May, when I woke up, the helmet was almost cold. Seriously, everyone who does it doesn't know what to do in advance. Finally, we believe that those who have not entered the melt-blown fabric industry should not enter it again. Those who are already in the industry should not panic or chaos. They must make qualified products. Friends who entered, continue to cheer, don't be discouraged. Xiamen LFT composite plastic Co.,ltd www.lft-g.com

Excerpt from Renmin.com, if there is any infringement, please contact us to delete. Thank you. Long fiber reinforced thermoplastic. On the morning of the 8th, at the press conference of the joint defense and control of foreign hospitals, Wang Bingnan, vice minister of commerce, said that sales of durable consumer goods that had been restrained from freezing in the early stage, such as auto appliances, rebounded significantly. During the "Labor Day" period, Shanghai, Chongqing, and Zhejiang key monitoring companies' auto sales increased by 49.6%, 28.5%, and 8.8% year-on-year, respectively, Long fiber reinforced thermoplastic LFT and sales of home appliances on some e-commerce platforms doubled year-on-year. During the “Labor Day” period, the active popularity of the national market rebounded significantly, and consumption accelerated. The average daily sales of key retail companies increased by 32.1% over the Qingming holiday, showing an accelerated recovery. Next, our chemical industry will also actively promote domestic and foreign business opportunities. Long fiber reinforced thermoplastic LFT can be widely used in automotive military, aerospace, and medical equipment accessories.