PA6-LGF PA6 modified plastics use pure PA6 as the matrix and enhance internal and external properties through blending, filling, strengthening, copolymerization, crosslinking, and other methods. They account for approximately 15% of PA6 applications. Long glass fiber content ranges from 20%–60%, adjusted according to product requirements, providing high strength, superior heat resistance, good impact resistance, and lightweight alternatives to certain metals. Common applications include power tool shells, garden tools, gears, sports equipment, and automotive parts. Other Specifications of PA6-LGF Flame Retardant PA6: PA6 is naturally flammable, but adding flame retardants changes its combustion properties. Mechanical mixing incorporates nitrogen, phosphorus, bromine-based, or mineral flame retardants. These materials are suitable for switches, low-voltage electrical housings, wiring terminals, and circuit breakers. Toughened PA6: Incorporating toughening agents improves low-temperature resistance, flexibility, fluidity, reduces shrinkage and water absorption, enhances impact and aging resistance. Ideal for baby carriage parts, rolling belts, line clips, and connectors. Applications Beyond daily applications, PA6 modified plastics are increasingly used in high-end fields such as rail transit, medical devices, military, and aerospace. TDS for Reference Nylon reinforced materials are made from PA6/PA66 resins with 20–60% glass fiber to increase strength. 30% fiber content is most common, but 40–50% can be used based on product requirements. Advantages of Long Glass Fiber Compounds 1. High-temperature resistance improves significantly after glass fiber reinforcement, especially for nylon plastics. 2. Shrinkage decreases and rigidity increases due to limited polymer chain movement. 3. Stress cracking is reduced and impact resistance improves. 4. Mechanical properties such as tensile, compression, and bending strength are enhanced. 5. Flame retardancy improves; most reinforced materials become self-extinguishing. Xiamen LFT Composite Plastic Co., Ltd. Xiamen LFT Composite Plastic Co., Ltd. specializes in LFT & LFRT, including Long Glass Fiber (LGF) and Long Carbon Fiber (LCF) series. Thermoplastic LFT can be used for LFT-G injection molding or LFT-D molding and customized in 5–25mm lengths. The company’s continuous fiber reinforced thermoplastics are ISO9001 & IATF16949 certified and have obtained multiple national trademarks and patents.

TPU introduction Thermoplastic polyurethane (TPU) elastomers are linear polymers formed by the copolymerization of hard and soft chain segments, which have physical properties such as tensile, abrasion and heat resistance, and elasticity similar to rubber. Thanks to the excellent product performance, the application fields of TPU are expanding, including daily consumer goods, construction, medical, military, automotive, agriculture and many other fields. New products and applications are also emerging, such as large-diameter hoses (shale gas extraction), charging cables for new energy vehicles, foamed TPU (ETPU) sports shoes midsoles prepared by supercritical foaming process, invisible braces, etc. Fiber reinforced modified TPU composites TPU has good impact resistance, but in some applications, high modulus of elasticity and very hard material is required. Glass fiber reinforced modification is a common technical means to improve the elastic modulus of the material. Through modification, thermoplastic composites with many advantages such as high elastic modulus, good insulation, heat resistance, good elastic recovery, good corrosion resistance, impact resistance, low coefficient of expansion and dimensional stability can be obtained. Long glass fiber VS Short glass fiber Compared with the short fiber, long fiber has more excellent performance in mechanical properties. It is more suitable for large products and structural parts. It has 1-3 times higher toughness than short fiber, and the tensile strength is increased by 0.5-1 times. Thermoplastics VS Thermosets Thermosets: when heated for the first time, they can soften and flow, and when heated to a certain temperature, they produce a chemical reaction a cross-chain curing and become hard, this change is irreversible, after that, when heated again, they can no longer become soft and flow. Thermoplastic: thermoplastic resin is the main component, and various additives are added to form a plastic. Under certain temperature conditions, plastic can be softened or melted into any shape, and the shape remains unchanged after cooling; this state can be repeated many times and always has plasticity, and this repeated is only a physical change. Advantages Thermosets: Thermoset plastics retain their strength and shape even when heated. This makes thermoset plastics ideal for producing permanent parts and large, strong shapes. In addition, these parts have excellent strength properties (despite their fragility) and do not lose significant strength when exposed to higher operating temperatures. Thermoplastics: Thermoplastics are the most widely used plastics and typically have high chemical and thermal resistance, as well as a high strength structure that is not easily deformed. It is made of thermoplastic resin as the main component with various additives.  Thermoplastic products have excellent electrical insulation, with very low dielectric constant and dielectric loss, suitable for high Frequency and high voltage insulation materials. TPU-LGF applications TDS for TPU-LGF Products details Number Length Colour Sample Price MOQ Package Delivery time TPU-NA-LGF30 12mm (can be customized) Natural colour (can be customized) Available Need to be confirmed 25kg 25kg/bag 7-15 days after shipment About us Company Xiamen LFT composite plastic Co., Ltd. is a brand-name company that focuses on LFT&LFRT. Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). The company's thermoplastic LFT can be used for LFT-G injection molding and extrusion, and can also be used for LFT-D molding. It can be produced according to customer requirements: 5~25mm in length. The company's long-fiber continuous infiltration reinforced thermoplastics have passed ISO9001 &16949 system certification, and the products have obtained lots of national trademarks and patents.

PP long glass fiber reinforced composite is a high-performance thermoplastic material made by compounding polypropylene (PP) with continuous long glass fibers. This material offers a significant improvement in mechanical properties compared to standard PP.

Fiber-reinforced PPA has high temperature resistance, high strength and low density, so it is considered the best resin to replace steel with plastic in the future. It can be used in many industrial and civil fields, including automobiles, equipment, entertainment, food processing, communications, electronics and electrical , power tools, gardening, etc.

MXD6 long glass fiber reinforced material offers excellent mechanical strength, dimensional stability, and outstanding gas barrier properties. It is ideal for applications requiring high stiffness, heat resistance, and reduced permeability, such as automotive components, electronics, and industrial parts.

PA6 refers to polyamide 6, which is a widely used engineering plastic with excellent mechanical strength, wear resistance, and chemical stability. Adding long glass fibers to PA6 can significantly enhance the material’s mechanical properties, such as strength, rigidity, impact resistance, and dimensional stability.

The mechanical properties of long glass fiber reinforced nylon 66 (LGFR-PA66) are obviously better than those of short glass fiber reinforced nylon 66 (SGFR-PA66), and the molding processing performance is also better. It can be molded by various molding methods such as injection molding and extrusion molding, and complex components can also be formed.

PP Material & LFT Solutions body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; background-color: #CCCCCC; padding: 10px; } h3 { font-size: 20px; margin-top: 20px; } p { margin: 10px 0; } .highlight { background-color: #FFFF99; color: #333; padding: 5px; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } ul { margin: 10px 0 10px 20px; } PP Material PP is a polymer made of propylene as monomer by coordination polymerization, and is one of the five major general-purpose plastics: PE, PP, PVC, PS, and ABS. Key Properties: Colorless, tasteless, non-toxic; can meet FDA and other food-grade material requirements when unadded. Due to crystalline nature, the original color is milky white translucent with better transparency than PE. Low specific gravity of 0.9, making it one of the lightest plastics compared to water. Good toughness, especially repeated bending resistance, commonly known as “100-fold rubber”. Better heat resistance than PE, up to 120°C. Good resistance to hydrolysis; can be sterilized by high-temperature steam. Excellent chemical resistance, particularly to acids; suitable for storing concentrated sulfuric acid. Outdoor use is susceptible to light, UV, and aging. Modified PP Material By filling PP with carbon fiber, the rigidity and modulus are increased, reducing deformation caused by shrinkage. However, toughness decreases. Adding anti-UV or anti-aging agents improves outdoor performance, and adding flame retardant materials improves fire resistance. TDS for Reference Only SGF vs LGF Long Carbon Fiber Specification Application Product Processing We Will Offer You LFT & LFRT material technical parameters and leading-edge design Mold front design and recommendations Technical support for injection molding and extrusion molding

Product Name: LFT Creep Resistant Nylon 6 Fill Long Carbon Fiber Reinforced Pellets Length: 12-25mm

PA12 & PA12-LCF Information body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; color: #339933; background-color: #f0f0f0; padding: 10px; } h3 { font-size: 20px; margin-top: 20px; } p { margin: 10px 0; } ul { margin: 10px 0 10px 20px; } a { color: #0073e6; text-decoration: none; } a:hover { text-decoration: underline; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } .product-links a { background-color: #CCCCCC; padding: 5px 10px; margin-right: 10px; display: inline-block; text-decoration: none; color: #000; } .faq strong { display: block; margin-top: 10px; } PA12 Information Long carbon chain nylon is a nylon with amide groups in the main chain repeating unit, where the methylene group between two amide groups is more than 10. Examples include nylon 11, nylon 12, etc. PA12, also known as poly(dodecalactam) or poly(laurolactam), is a semi-crystalline thermoplastic material. It has low water absorption, high dimensional stability, heat resistance, corrosion resistance, toughness, and easy processing. Compared with PA11, PA12's raw material is only one-third the cost of PA11, making it widely used in automotive fuel hoses, air brake hoses, submarine cables, and 3D printing. PA12 offers advantages over other nylons, including low water absorption, low density, low melting point, impact and friction resistance, low-temperature resistance, fuel resistance, good dimensional stability, and noise reduction. It combines the properties of PA6, PA66, and polyolefins (PE, PP) for lightweight yet strong materials. PA12-LCF Adding carbon fiber to PA12 is like adding steel reinforcement to concrete. The fiber bears most of the external forces, improving overall structural strength. Carbon fiber has high axial strength and modulus, low density, high specific performance, no creep, excellent fatigue resistance, corrosion resistance, and superior thermal and electrical properties. Compared with glass fiber, carbon fiber has over 3 times the Young's modulus, and about twice that of Kevlar fiber. Carbon fiber reinforced nylon materials (CF/PA) have developed rapidly due to high strength, rigidity, thermal stability, dimensional accuracy, wear resistance, and excellent damping properties compared to glass fiber reinforced nylon. Datasheet for Reference PA12 has low water absorption, good low-temperature resistance, excellent air tightness, alkali and grease resistance, medium resistance to alcohols and dilute inorganic acids, and good mechanical and electrical properties. It is also self-extinguishing. Application Suitable for automotive, sports parts, solar energy, high-end toys, and other industries. Other Products You May Wonder PP-LCF PA6-LCF PA66-LCF Frequently Asked Questions 1. How does thermoplastic carbon fiber composite material achieve low cost and environmental protection? Thermoplastic carbon fiber composites are used to make parts for high-end machinery. They have excellent machinability, vacuum forming, stamping mold plasticity, and bending processability. 2. Are thermoplastic carbon fiber composites only suitable for injection molding? Injection molding offers high automation, protects material from contamination, and ensures product quality and precision. It is suitable for complex-shaped and mass production. Reinforcement is done with short or powdered carbon fibers; continuous fiber cannot be used in this process. Compression molding is simpler and cheaper for equipment and molds. It can be used for both thermosetting and thermoplastic resins, reduces raw material loss, and is suitable for mass production with lower cost. Xiamen LFT Composite Plastic Co., Ltd. We Will Provide You: LFT & LFRT material technical parameters and leading-edge design Mold front design and recommendations Technical support for injection molding and extrusion molding

PLA materials are current pioneering materials in biodegradable materials. Long carbon fiber Reinforced polylactic acid PLA modified materials are likely to become global advantages in future green materials.

PA6 Long Carbon Fiber Composite body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; background-color: #f0f0f0; padding: 10px; color: #339933; } p { margin: 10px 0; } ul { margin: 10px 0 10px 20px; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } Polyamide 6 (PA6) Nylon 6 (PA6) is a general engineering plastic with lightweight, wear resistance, corrosion resistance, and good toughness. As a thermoplastic resin, it softens when heated and hardens when cooled, allowing repeated processing. Long Carbon Fiber Carbon fiber has high strength, high modulus, large specific surface area, and high electrical conductivity. Compared with glass fiber, carbon fiber provides maximum strength along the fiber direction. Carbon fiber reinforced composites are stronger than polymer matrix materials while maintaining light weight, gradually replacing traditional metals in electronics, electric vehicles, medical devices, industrial equipment, and sports/leisure products. LCF VS SCF Advantages of Long Carbon Fiber Filled High strength and high toughness Small coefficient of thermal expansion Low hardness and light weight Corrosion resistance and aging resistance Temperature resistance TDS of PA6 for Reference Application of PA6 Suitable for manufacturing helmets, car bumpers, treadmills, etc. Certifications Factory & Warehouse Teams & Customers About Us Xiamen LFT Composite Plastic Co., Ltd is a brand-name company focusing on LFT & LFRT: Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). Our thermoplastic LFT materials can be used for LFT-G injection molding, extrusion, and LFT-D molding. Fiber lengths can be customized from 5~25mm. Our continuous infiltration reinforced thermoplastics have passed ISO9001 & IATF16949 certification, and products hold multiple national trademarks and patents.