Product Name: Polyamide12 long glass fiber composite,Nylon 12 composite Certificated: SGS, 16949 system certificated,MSDS,and so on.

Compared to short fiber counterparts, this composite offers superior load-bearing capability and long-term durability under dynamic stress conditions. Its balanced properties make it ideal for structural components in the automotive, aerospace, power tool, and industrial sectors, where lightweight yet robust materials are essential.

Polyamide, which is also known by the trade name, Nylon, has excellent heat resistant properties, especially when combined with additives and filler materials. In addition to this, Nylon is very resistant to abrasion. Xiamen LFT offers a wide range of temperature-resistant nylons with many different filler materials.

Polyamide, which is also known by Nylon, has excellent heat resistant properties, especially when combined with additives and filler materials. In addition to this, Nylon is very resistant to abrasion. Xiamen LFT offers a wide range of temperature-resistant nylons with many different filler materials.

Long glass fiber reinforced nylon 66 has better reinforcement effect and dimensional stability, and the rigidity, tensile, bending, impact resistance and fatigue resistance of the manufactured products are better, and the service life is longer.

The characteristics of the material may be considerably improved by mixing glass fibers with Nylon compounds. Glass fibers act as reinforcement and slow down the movement of the polymer chains to boost the material's strength and stiffness.

Polyamide 6 (PA6) Material Polyamide 6 (PA6) has chemical and physical properties very similar to PA66. However, differences in molecular structure lead to distinct performance characteristics. PA6 features a lower melting point and a wider processing temperature window, offering better impact resistance and solubility resistance than PA66, while also exhibiting higher moisture absorption. Since many quality characteristics of plastic parts are affected by hygroscopicity, molding shrinkage is largely influenced by crystallinity and moisture absorption. Therefore, these factors must be carefully considered when designing PA6 products. Fiber-reinforced PA6 effectively reduces shrinkage and mitigates issues caused by moisture absorption. Its high crystallinity and excellent flowability contribute to improved dimensional stability and overall part performance. Datasheet Nylon products should be used with attention to dimensional deviation caused by thermal expansion and moisture absorption. Conventional PA6 also shows limited acid resistance and UV resistance. Long-term exposure to high temperatures may cause thermal oxidation, resulting in discoloration and eventual material degradation. Therefore, unmodified nylon is generally not recommended for outdoor applications. Carbon fiber reinforced modified PA6 significantly improves creep resistance, rigidity, wear resistance, and mechanical strength, enabling stable performance in outdoor and demanding environments. *Tip: Poor compatibility between carbon fiber and PA6 may lead to fiber floating and reduced mechanical properties. Xiamen LFT’s PA6 composites feature excellent fiber–matrix compatibility, effectively avoiding these issues. Advantages Strength & Durability: Excellent balance of rigidity and heat resistance Optimized Design: Superior surface appearance suitable for complex structures Excellent Processability: High flowability and thermal stability for precision molding High Thermal Stability: Reliable performance under elevated temperatures Stable Electrical Properties: Consistent insulation across wide temperature and frequency ranges Applications Long carbon fiber reinforced PA6 enhances strength, heat resistance, impact resistance, and dimensional stability, making it suitable for both industrial and consumer applications. With trends toward lightweight and compact automotive design, under-the-hood temperatures continue to rise. Carbon fiber reinforced PA6 meets these demanding requirements and is widely used in automotive engine components, electrical systems, body structures, and airbag-related parts. Due to its excellent mechanical properties, dimensional stability, heat resistance, and aging resistance, carbon fiber reinforced PA6 is also commonly applied in mechanical parts and aerospace equipment components. Long carbon fiber reinforced PA6 features high flowability, high rigidity, excellent mechanical strength, low shrinkage, creep resistance, thermal stability, wear resistance, oil resistance, uniform fiber dispersion, and good surface gloss. Typical applications include power tools, fishing equipment, automotive parts, machinery components, and office accessories. Certifications ISO 9001 & IATF 16949 Quality Management System Certification National Laboratory Accreditation Certificate Modified Plastics Innovation Enterprise REACH & RoHS Heavy Metal Compliance Factory Contact Us

PA12 & PA12-LCF Information body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; color: #339933; background-color: #f0f0f0; padding: 10px; } h3 { font-size: 20px; margin-top: 20px; } p { margin: 10px 0; } ul { margin: 10px 0 10px 20px; } a { color: #0073e6; text-decoration: none; } a:hover { text-decoration: underline; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } .product-links a { background-color: #CCCCCC; padding: 5px 10px; margin-right: 10px; display: inline-block; text-decoration: none; color: #000; } .faq strong { display: block; margin-top: 10px; } PA12 Information Long carbon chain nylon is a nylon with amide groups in the main chain repeating unit, where the methylene group between two amide groups is more than 10. Examples include nylon 11, nylon 12, etc. PA12, also known as poly(dodecalactam) or poly(laurolactam), is a semi-crystalline thermoplastic material. It has low water absorption, high dimensional stability, heat resistance, corrosion resistance, toughness, and easy processing. Compared with PA11, PA12's raw material is only one-third the cost of PA11, making it widely used in automotive fuel hoses, air brake hoses, submarine cables, and 3D printing. PA12 offers advantages over other nylons, including low water absorption, low density, low melting point, impact and friction resistance, low-temperature resistance, fuel resistance, good dimensional stability, and noise reduction. It combines the properties of PA6, PA66, and polyolefins (PE, PP) for lightweight yet strong materials. PA12-LCF Adding carbon fiber to PA12 is like adding steel reinforcement to concrete. The fiber bears most of the external forces, improving overall structural strength. Carbon fiber has high axial strength and modulus, low density, high specific performance, no creep, excellent fatigue resistance, corrosion resistance, and superior thermal and electrical properties. Compared with glass fiber, carbon fiber has over 3 times the Young's modulus, and about twice that of Kevlar fiber. Carbon fiber reinforced nylon materials (CF/PA) have developed rapidly due to high strength, rigidity, thermal stability, dimensional accuracy, wear resistance, and excellent damping properties compared to glass fiber reinforced nylon. Datasheet for Reference PA12 has low water absorption, good low-temperature resistance, excellent air tightness, alkali and grease resistance, medium resistance to alcohols and dilute inorganic acids, and good mechanical and electrical properties. It is also self-extinguishing. Application Suitable for automotive, sports parts, solar energy, high-end toys, and other industries. Other Products You May Wonder PP-LCF PA6-LCF PA66-LCF Frequently Asked Questions 1. How does thermoplastic carbon fiber composite material achieve low cost and environmental protection? Thermoplastic carbon fiber composites are used to make parts for high-end machinery. They have excellent machinability, vacuum forming, stamping mold plasticity, and bending processability. 2. Are thermoplastic carbon fiber composites only suitable for injection molding? Injection molding offers high automation, protects material from contamination, and ensures product quality and precision. It is suitable for complex-shaped and mass production. Reinforcement is done with short or powdered carbon fibers; continuous fiber cannot be used in this process. Compression molding is simpler and cheaper for equipment and molds. It can be used for both thermosetting and thermoplastic resins, reduces raw material loss, and is suitable for mass production with lower cost. Xiamen LFT Composite Plastic Co., Ltd. We Will Provide You: LFT & LFRT material technical parameters and leading-edge design Mold front design and recommendations Technical support for injection molding and extrusion molding

What is Polyamide 66 plastic? PA66 melting point 260~265℃, glass transition temperature (dry state) is 50℃. Density is 1.13~1.16 g/cm3. PA66 has low water absorption, excellent dimensional stability and high rigidity. Higher melting point, can be used for a long time in harsh environments, in a wide range of temperatures can still maintain sufficient stress, continuous use temperature of 105 ℃. Long glass fiber reinforced composite Glass fiber reinforced plastic is based on the original pure plastic, filling glass fibers and other additives, so as to improve the scope of use of the material. Generally speaking, most of the glass fiber reinforced materials are used in the structural parts of the products, which is a kind of structural engineering materials, such as: PP, ABS, PA66, PA6, TPU, PPA, PBT, PEEK, PBT, PPS and so on. Advantages 1)After glass fiber reinforcement, glass fiber is a high temperature resistant material, therefore, the heat-resistant temperature of reinforced plastics is much higher than before without glass fiber, especially nylon plastics. 2)After the glass fiber reinforcement, due to the addition of glass fiber, the plastic polymer chain is restricted to move with each other, therefore, the shrinkage of reinforced plastics decreases a lot, and the rigidity is greatly improved. 3)After glass fiber reinforced, the reinforced plastic will not stress cracking, at the same time, the impact resistance of the plastic improves a lot. 4)After the glass fiber reinforcement, the glass fiber is a high strength material, which also greatly improves the strength of the plastic, such as: tensile strength, compression strength, bending strength, improve a lot. 5)After glass fiber reinforcement, due to the addition of glass fiber and other additives, the combustion performance of the reinforced plastics decreases a lot, most of the materials can not be ignited, it is a kind of flame-retardant material. Datasheet for reference Applications PA66's comprehensive performance is good, with high strength, good rigidity, impact resistance, oil and chemical resistance, abrasion resistance and self-lubricating advantages, especially hardness, rigidity, heat resistance and creep performance is better. Datails Grade Fiber specification Main characteristics Applications General grade 20%-60% high toughness (especially at low temperatures), excellent creep and fatigue resistance, low warpage Automobiles, electronic and electrical appliances, sports equipment, power tools, high-speed rail parts, etc. Toughen resistance grade 20%-50% high impact strength, light texture Automobiles, electronic appliances, sports equipment, power tools, tool handles, high-speed rail parts, gears, etc. Lab & Factory About company Xiamen LFT Composite Plastic Co.,LTD was established in 2009, is a brand-name global suppliers of long fiber reinforced thermoplastic materials integrating product research & development（R&D）, production and sale marketing. Our LFT products have passed the ISO9001&16949 system certification and have obtained lots of national trademarks and patents, covering the fields of automotive, military parts and firearms, aerospace, new energy, medical equipment, power wind energy, sports equipment, etc.