-
Introduction to nylon carbon fiber PA6 PA66 Polyamide Pellets
2019-09-29
Carbon Fiber Reinforced Composite (CFRP) Carbon fiber is just a fiber that cannot be used to make parts. Therefore, carbon fiber should be used together with resin to make composite materials. Carbon fiber nylon, a type of conductive nylon, is a carbon fiber added to a nylon base. The material incorporates high-rigidity carbon fibers based on the properties of nylon, giving the material a higher m...
view more
-
A helt Long glass fiber PA6 66 reinforced
2020-05-18
A few days ago, from June 1, the whole country will carry out the "One Helmet and One Belt" security guard operation. A helmet-with a helmet A belt-with a seat belt. The purpose is to enhance the safety consciousness of motorcycle and electric bicycle riders wearing safety helmets, and the safety of automobile drivers and passengers, and to reduce traffic accident damage and mortality. Therefore, ...
view more
-
PA66 50%content GF&LGF thermoplastic material comparison
2021-04-30
In the face of high load and impact stress at high temperature and conductions,common short glass fiber materials are often unable to match,in this case,the polymer began to soften or brittle,long glass fiber reinforced thermoplastic polymer came into being. The product process of long glass fiber modified Pa66 materials is not complicated,and there are many material manufacturers on the market ca...
view more
-
Comparison of mechanical properties between LFT and SFT composites
2021-06-23
The fiber size of SFT composite material is short (1~3 mm). After the screw plasticizing and injection molding of the injection molding machine, the fiber length in the product will be further shortened (0.2~0.5 mm), the fiber retention length will be less than 0.3 mm, the size will be less than the critical length of the size, so SGF can not play a strengthening role. The fibers in the LFT compos...
view more
-
Carbon Fiber Fill PA12 Nylon12 Long Carbon Fiber Plastic Granules
2021-10-28
Compared with other nylons, PA12 long carbon fiber composite material has low density, good low temperature resistance and wear resistance, has a certain degree of self-lubrication, and its water absorption rate is lower than other nylons. The resistance to stress cracking is better than PA6 and PA66, and it has excellent resistance to alkali, oil and grease. PA12 resin has high crystallinity, low...
view more
-
Lightweight Replace steel with plastic to make PA6 gearbox cover
2021-12-20
The chemical company LANXESS cooperated with a Hebei manufacturer of auto parts to develop the first gearbox side cover made of polyamide 6 (PA6) for the world-renowned SUV and pickup truck manufacturers. Compared with the original metal version (die-cast aluminum cover), the new version greatly improves the integration of different functional features. · Lightweight design solutions have achieved...
view more
-
Is glass filled nylon heat resistant?
2021-12-23
The mechanical properties of blended materials such as glass fiber and toughening agent are added to nylon. The results show that with the increase of glass fiber content, the tensile strength and bending strength of the material are greatly improved, and the impact strength is more complicated. Adding, the toughness of the material is greatly improved. Adding 30% to 35% of glass fiber, 8% to 12% ...
view more
-
What is nylon composite?
2021-12-30
Nylon and carbon fiber are both excellent materials in the field of engineering plastics. The composite material comprehensively reflects the advantages of the two. For example, the strength and rigidity are much higher than that of unreinforced nylon, the high temperature creep is small, and the thermal stability is significantly improved. , Good dimensional accuracy and wear resistance. It has e...
view more
-
The related knowledge of nylon
2023-02-23
Invention of nylon Nylon (Nylon), named Polyamide in English, is a man-made polymer. Wallace Carothers of DuPont invented the plastic on February 28, 1935, in Wilmington, USA. Nylon was officially marketed in 1938. The first nylon products were nylon brushes for toothbrushes (sold on February 24, 1938) and nylon stockings for women (sold on May 15, 1940). The appearance of nylon makes the textile ...
view more
-
Modified nylon PA6 and PA66 are what material, what is the difference between them?
2023-03-30
PA6, also known as nylon 6, is a translucent or opaque milky white particle, with thermoplastic, light weight, good toughness, chemical resistance and durability characteristics, generally used in auto parts, mechanical parts, electronic and electrical products, engineering accessories and other products. The chemical and physical properties of PA6 are similar to those of PA66; however, it has a l...
view more
-
The difference between Polyamide6 and Polyamide66
2023-06-08
At present, modern design tends to lightweight requirements, the use of plastic proportion is increasing, no matter what industry, as long as the plastic can replace the absolute metal, plastic another advantage is the process of low cost, molding easier. Among the many polymer plastic materials, nylon is the leader, especially in the automotive industry, basically can not be separated from the ny...
view more
-
Technical Article: Difference between PA6 and PA66
2023-08-11
Polyamide resin, the English name for polyamide, PA for short, commonly known as nylon (Nylon). It is a macromolecular main chain repeating units containing amide groups in the polymer of the general term. Is the five engineering plastics in the production of the largest, most varieties, the most widely used varieties, and other polymer blends and alloys, etc., to meet different special requiremen...
view more
e-mail
English
français
Deutsch
русский
italiano
español
português
العربية
日本語
한국의
中文