PPA long glass fiber reinforced material combines exceptional heat resistance, mechanical strength, and chemical durability. It is ideal for precision components in automotive, electrical, and industrial applications that require stability under extreme conditions.

PBT Long Glass Fiber Reinforced Material offers excellent dimensional stability, high strength, and outstanding chemical resistance. It is ideal for structural components requiring durability, heat resistance, and long-term mechanical performance.

PA12 PA12 polyamide or nylon 12 Chemical and physical properties of PA12 PA12 is a linear, semi-crystalline - crystalline thermoplastic material from butadiene. Its properties are similar to PA11, but its crystal structure is different. PA12 is a good electrical insulator and will not be affected by moisture as other polyamides. PA12 has good impact resistance mechanical and chemical stability. There are many improved varieties of PA12 in terms of plasticizing and reinforcing properties. Compared with PA6 and PA66, these materials have lower melting point and density, and have very high moisture recovery. PA12 has no resistance to strong oxidizing acids. The viscosity of PA12 depends mainly on humidity, temperature and storage time. PA12 It's very liquid. The shrinkage rate of PA12 is between 0.5% and 2%, depending on the variety of PA12 material, wall thickness and other process conditions. PA12 compounds plastic Nylon glass fiber material is a kind of composite material, adding glass fiber on the basis of the original nylon material, so that the material has the following characteristics: High temperature resistance, good dimensional stability, good toughness, good insulation, corrosion resistance, high mechanical strength. LGF & SGF comparison Compared with the short fiber, it has more excellent performance in mechanical properties. It is more suitable for large products and structural parts. It has 1-3 times higher (toughness) than short fiber, and the tensile strength (strength and rigidity) is increased by 0.5-1 times. Datasheet for reference Application ■ Power tools: cutting machine, electric saw, electric drill, Angle grinder, polishing machine, electric hammer, electric pick, hot air gun and other models; ■ Automotive industry: cooling chamber, intake manifold, frame bracket, ventilation grille, door handle, throttle body and other models; ■ Machinery industry: water pump, water valve, bearing, shaft sleeve, gear, bracket and other models; ■ Sports equipment: ski equipment, baby carriage, fitness equipment parts and other models; ■ Office equipment: seat bracket, pulley, rotating shaft, shredder gear, printer parts and other models. Certification Factory Why choose us

Polyphthalamide is a high-performance resin and member of the nylon family with exceptional thermal, mechanical, and physical properties. It is hygroscopic, opaque, semicrystalline, and can be used in plastic injection molding. Most PPA are filled with glass fiber or carbon fiber to enhance stiffness for high-temperature applications. As a result, PPA is often used in applications in place of metal or higher-priced thermoplastic.

Our PBT Long Glass Fiber Reinforced Structural Composite Material combines high-performance Polybutylene Terephthalate (PBT) resin with long glass fiber (LGF) to create a material that delivers exceptional strength, heat resistance, and dimensional stability. This advanced material is designed for demanding applications in industries such as automotive, electronics, and industrial machinery.

In the automotive industry, it is used because it is cheaper and lighter than metal. In machines, it is used over other materials due to its high flexibility and durability. 

Nylon 6,6, is a more crystalline version of nylon 6. It is also referred to as polyamide 66 or PA 66. It has improved mechanical properties due to its more ordered molecular structure. Nylon 66 for machining has improved temperature resistance and lower rates of water absorption when compared to standard nylon 6.

Pa12 gf20 is a type of engineering plastic that consists of polyamide 12 (pa12) compounds reinforced with 20% glass fibers. It is a high-performance material that has many advantages over pure nylon 12, such as higher strength, stiffness, thermal resistance, chemical resistance, and electrical properties. Pa12 gf20 is widely used for various applications in different industries, such as automotive, aerospace, medical, electrical, and industrial.

MXD6 Plastic | Long Glass Fiber Reinforced MXD6 (MXD6-LGF) What is MXD6? Polyadipyl-m-benzoylamine, commonly referred to as MXD6 or nylon MXD6, is a high-performance engineering thermoplastic. Compared to other engineering plastics, MXD6 has higher mechanical strength and modulus. It is also a special high barrier nylon, with excellent resistance to oxygen and carbon dioxide. Unlike PVDC or EVOH, its barrier performance is not affected by temperature or humidity, making MXD6 ideal for high-temperature and humid conditions. Structural and Mechanical Performance MXD6 nylon exhibits high strength, high rigidity, high thermal deformation temperature, low thermal expansion, excellent dimensional stability, and low water absorption. Its mechanical properties change minimally after water absorption. MXD6 has low shrinkage for precision forming, excellent paintability at high temperatures, and outstanding barrier properties. Advantages of MXD6 Maintains high strength and rigidity over a wide temperature range High heat deflection temperature with low thermal expansion coefficient Low water absorption and minimal mechanical property reduction Small molding shrinkage, suitable for precision molding processes Excellent paintability, especially at high temperatures Outstanding barrier to oxygen, carbon dioxide, and other gases MXD6-LGF | Long Glass Fiber Reinforced MXD6 MXD6 can be compounded with long glass fibers, carbon fibers, minerals, and advanced fillers to produce composites with 50-60% glass fiber reinforcement. This results in exceptional strength and stiffness while maintaining a smooth, resin-rich surface ideal for painting, metal coating, or reflective housings. Key Advantages of MXD6-LGF High fluidity for thin walls: Can fill walls as thin as 0.5 mm even with 60% glass fiber content. Excellent surface finish: Resin-rich surfaces provide high gloss appearance despite high fiber content. Very high strength and stiffness: Comparable to many cast metals and alloys with 50-60% glass fiber. Good dimensional stability: Low shrinkage and tight tolerances; coefficient of linear expansion similar to many metals. MXD6-LGF TDS (Technical Data Sheet) Applications of MXD6-LGF MXD6-LGF replaces metals for high-quality structural parts in automotive, electronics, and electrical appliances. It performs well in environments requiring high mechanical strength and oil resistance, operating at 120–160℃ long-term. With glass fiber reinforcement, MXD6 maintains heat resistance up to 225℃, suitable for cylinder blocks, cylinder heads, pistons, and synchronous gears of automotive engines. MXD6/PPO alloys offer high temperature resistance, high strength, wear resistance, oil resistance, and excellent dimensional stability, enabling metal replacement in automotive body panels, fenders, wheel covers, and complex curved parts. About Us

PLA Plastic | Long Glass Fiber Reinforced PLA (PLA-LGF) What is PLA? Polylactic acid (PLA) is a biodegradable and eco-friendly polymer plastic, produced via pollution-free processes. PLA can naturally degrade and recycle in the environment, making it an ideal green polymer material and one of the most representative biodegradable plastics. PLA Structure and Heat Resistance The molecular structure of PLA affects its heat resistance, toughness, mechanical strength, degradability, and biocompatibility. PLA has a spiral molecular chain with low activity, resulting in slow crystallization after injection molding and relatively poor heat resistance. During hot processing, ester bonds may break partially, generating terminal carboxyl groups that accelerate thermal degradation. Long Glass Fiber (LGF) Reinforced PLA Reinforcing PLA with long glass fibers (PLA-LGF) improves mechanical strength, rigidity, and heat resistance. The fibers act as skeleton support, restricting polymer chain movement during heating and increasing thermal stability. Types of Fibers for PLA Reinforcement Fibers used for PLA enhancement include: Natural plant fibers: sisal, flax, linen, bamboo, coconut, wood fiber Animal fibers: silk Mineral fibers: basalt fiber Chemical fibers: glass fiber, carbon fiber Glass fiber and carbon fiber are widely used due to their high strength and modulus, while natural fibers are favored for biodegradability and renewable sources. Modified fibers blended with PLA have shown Vicat softening temperatures exceeding 140°C. Compared with Short Fiber (SGF) Long glass fiber reinforced PLA demonstrates superior mechanical properties compared with short fiber (SGF) reinforced PLA. It is more suitable for large structural parts, offering 1–3 times higher toughness and 0.5–1 times greater tensile strength and rigidity. Injection Molding of PLA-LGF Lab & Testing Warehouse & Storage Certification About Xiamen LFT Composite Plastic Co., Ltd. Xiamen LFT Composite Plastic Co., Ltd. specializes in long fiber reinforced thermoplastics (LFT) including PLA

PA6 Material Overview PA6 (Polyamide 6) is a widely used engineering plastic with excellent balanced performance. Its raw materials are readily available and cost-effective, making it accessible without dependence on foreign technology. However, PA6 has some limitations such as high water absorption, lower low-temperature impact toughness, and moderate dimensional stability. To overcome these limitations, PA6 is often reinforced with glass fiber (GF) to enhance mechanical properties. PA6-LGF (Long Glass Fiber Reinforced PA6) 1. Influence of Glass Fiber Content Glass fiber content is a key factor in the performance of reinforced composites. Increasing fiber content increases fiber density, thinning the PA6 matrix between fibers. This enhances impact toughness, tensile strength, and bending strength. Example: For PA6-LGF, increasing fiber content to 35% raised notch impact strength from 24.8 J/m to 128.5 J/m. However, excessive fiber content can reduce impact strength. Bending strength also improves as fibers transfer stress and absorb energy when broken, with experimental results showing bending modulus up to 4.99 GPa for 35% LGF. 2. Influence of Fiber Retention Length Fiber length significantly affects mechanical properties. When fiber length is below the critical length, increasing length improves resin-fiber bonding and tensile load resistance. When fiber exceeds the critical length, longer fibers absorb more impact energy and improve impact strength, as the number of fiber ends (crack initiation points) decreases. Example: At 40% fiber content, increasing fiber length from 4mm to 13mm improved tensile strength from 154.8 MPa to 164.4 MPa, with bending strength and notched impact strength increasing by 24% and 28%, respectively. Fibers longer than 7mm enhance warping resistance and mechanical stability under high temperature and humidity. Technical Data Reference (TDS) PA6-LGF can be reinforced with 20%-60% long glass fiber depending on product requirements. Compared to unreinforced PA6, PA6-LGF offers enhanced strength, heat resistance, impact resistance, dimensional stability, and reduced warping. The following TDS shows the data for PA6-LGF30. Applications of PA6-LGF PA6-LGF is widely used in automotive, electronic/electrical, and machinery/engineering parts. Automotive Parts Lightweight and miniaturization trends promote PA6-LGF use in engines, electrical systems, and body components. Electronic & Electrical Components Excellent flame retardancy and corrosion resistance make PA6-LGF suitable for switchgear, circuit breakers, contactors, connectors, and cable protection tubes. Mechanical & Engineering Parts Good impact resistance, wear resistance, and self-lubrication properties allow PA6-LGF to be used in machinery and engineering accessories. About Xiamen LFT Composite Plastics Co., Ltd. Xiamen LFT focuses on Long Glass Fiber (LGF) and Long Carbon Fiber (LCF) reinforced thermoplastics. Our LFT materials support injection molding (LFT-G) and extrusion molding, as well as LFT-D molding, with fiber lengths from 5–25mm. Our products are ISO9001 & IATF16949 certified, patented, and widely used in automotive, electronics, industrial, and engineering applications.

Product number: PA12-NA-LGF Fiber specification: 20%-60% Product feature: High strength, High toughness and durability Product application: Suitable for automotive, sports parts, solar energy, photovoltaic industry and other industries.