Long carbon fiber Carbon fiber has many excellent properties, high axial strength and modulus, low density, high specific performance, no creep, super high temperature resistance in non-oxidizing environment, good fatigue resistance, specific heat and electrical conductivity between non-metal and metal, small coefficient of thermal expansion and anisotropy, good corrosion resistance, good X-ray transmission. Good electrical and thermal conductivity, good electromagnetic shielding, etc. Compared with traditional glass fiber, carbon fiber has more than 3 times of Young's modulus; it is about 2 times of Young's modulus compared with Kevlar fiber, which is insoluble and swollen in organic solvents, acids and alkalis, and has outstanding corrosion resistance. But is there a way to reduce the price of carbon fiber? That is to mix it with relatively cheap nylon material to form a composite material with good performance and meet the requirements. In that case, there is no doubt that carbon fiber nylon will definitely have a place in the composite material. Nylon itself is an engineering plastic with excellent performance, but moisture absorption, poor dimensional stability of products. Strength and hardness are also far from metal. In order to overcome these shortcomings, as early as before the 70s. People have used carbon fiber or other varieties of fibers for reinforcement to improve its performance. Carbon fiber reinforced nylon materials have developed rapidly in recent years, because nylon and carbon fiber are excellent performance in the field of engineering plastics materials, its compound material synthesis reflects the superiority of the two, such as strength and rigidity than unreinforced nylon is much higher, high temperature creep is small, thermal stability has improved significantly, good dimensional accuracy, wear resistance. Excellent damping, compared with glass fiber reinforced has better performance. Therefore, carbon fiber reinforced nylon (CF / PA) composites have developed rapidly in recent years. And for 3D printing using SLS technology is the most suitable technical means to achieve carbon fiber reinforced nylon. TDS for reference Application Our company Xiamen LFT composite plastic Co., Ltd is a brand-name company that focuses on LFT&LFRT. Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). The company's thermoplastic LFT can be used for LFT-G injection molding and extrusion, and can also be used for LFT-D molding. It can be produced according to customer requirements: 5~25mm in length. The company's continuous infiltration reinforced thermoplastics have passed ISO9001&16949 system certification,  and the products have obtained lots of national trademarks and patents.

MXD6 is a high-performance semi-aromatic polyamide known for its exceptional gas barrier properties, mechanical strength, and thermal stability. It is widely used in automotive, packaging, and industrial applications where durability and chemical resistance are essential. Ideal for structural and functional components, MXD6 delivers reliable performance in demanding environments.

What is Polyamide 66 plastic? PA66 melting point 260~265℃, glass transition temperature (dry state) is 50℃. Density is 1.13~1.16 g/cm3. PA66 has low water absorption, excellent dimensional stability and high rigidity. Higher melting point, can be used for a long time in harsh environments, in a wide range of temperatures can still maintain sufficient stress, continuous use temperature of 105 ℃. Long glass fiber reinforced composite Glass fiber reinforced plastic is based on the original pure plastic, filling glass fibers and other additives, so as to improve the scope of use of the material. Generally speaking, most of the glass fiber reinforced materials are used in the structural parts of the products, which is a kind of structural engineering materials, such as: PP, ABS, PA66, PA6, TPU, PPA, PBT, PEEK, PBT, PPS and so on. Advantages 1)After glass fiber reinforcement, glass fiber is a high temperature resistant material, therefore, the heat-resistant temperature of reinforced plastics is much higher than before without glass fiber, especially nylon plastics. 2)After the glass fiber reinforcement, due to the addition of glass fiber, the plastic polymer chain is restricted to move with each other, therefore, the shrinkage of reinforced plastics decreases a lot, and the rigidity is greatly improved. 3)After glass fiber reinforced, the reinforced plastic will not stress cracking, at the same time, the impact resistance of the plastic improves a lot. 4)After the glass fiber reinforcement, the glass fiber is a high strength material, which also greatly improves the strength of the plastic, such as: tensile strength, compression strength, bending strength, improve a lot. 5)After glass fiber reinforcement, due to the addition of glass fiber and other additives, the combustion performance of the reinforced plastics decreases a lot, most of the materials can not be ignited, it is a kind of flame-retardant material. Datasheet for reference Applications PA66's comprehensive performance is good, with high strength, good rigidity, impact resistance, oil and chemical resistance, abrasion resistance and self-lubricating advantages, especially hardness, rigidity, heat resistance and creep performance is better. Datails Grade Fiber specification Main characteristics Applications General grade 20%-60% high toughness (especially at low temperatures), excellent creep and fatigue resistance, low warpage Automobiles, electronic and electrical appliances, sports equipment, power tools, high-speed rail parts, etc. Toughen resistance grade 20%-50% high impact strength, light texture Automobiles, electronic appliances, sports equipment, power tools, tool handles, high-speed rail parts, gears, etc. Lab & Factory About company Xiamen LFT Composite Plastic Co.,LTD was established in 2009, is a brand-name global suppliers of long fiber reinforced thermoplastic materials integrating product research & development（R&D）, production and sale marketing. Our LFT products have passed the ISO9001&16949 system certification and have obtained lots of national trademarks and patents, covering the fields of automotive, military parts and firearms, aerospace, new energy, medical equipment, power wind energy, sports equipment, etc.

ABS is a thermoplastic polymer that is durable and easy to work with.

PPS & PPS-LGF Overview body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; } h2 { font-size: 24px; color: #000; margin-top: 30px; } p { font-size: 18px; } table { width: 100%; border-collapse: collapse; margin-top: 15px; margin-bottom: 15px; } table, th, td { border: 1px solid #000; } th, td { padding: 8px; text-align: center; } img { max-width: 100%; margin-top: 15px; margin-bottom: 15px; } What is PPS? Polyphenylene sulfide (PPS) is a high-performance thermoplastic resin. With excellent high temperature resistance, corrosion resistance, wear resistance, flame retardancy, balanced physical and mechanical properties, dimensional stability, and electrical properties, it offers high mechanical strength, chemical resistance, flame resistance, good thermal stability, and excellent electrical properties. PPS is hard and brittle with high crystallinity, good thermal stability, and strong chemical corrosion resistance. Pure PPS has relatively low impact strength. It has good creep resistance under load, high hardness, high wear resistance (wear at 1000 RPM is only 0.04g), and certain self-lubrication properties. Its mechanical properties are less sensitive to temperature. What is PPS-LGF? PPS is one of the best heat-resistant engineering plastics. When modified with glass fiber, its heat distortion temperature is generally above 260°C, and its chemical resistance is second only to PTFE. Advantages include small shrinkage, low water absorption, good fire resistance, vibration fatigue resistance, arc resistance at high temperature, and excellent electrical insulation in high humidity. Its disadvantages, such as brittleness and low impact strength, can be overcome with modifications, resulting in excellent comprehensive performance. PPS-LGF can replace metals including stainless steel, copper, aluminum, and alloys in many applications. Applications of PPS-LGF PPS-LGF is widely used in automotive, aerospace, household appliances, mechanical construction, and chemical industries for structural parts, transmission parts, insulation parts, corrosion-resistant parts, and seals. It allows products to maintain strength while reducing weight. Datasheet for reference Product Details Number Color Length MOQ Package Sample Delivery Time Port of Loading PPS-NA-LGF30 Original color (can be customized) 5-25mm above 25kg 25kg/bag Available 7-15 days after shipment Xiamen Port Production Process Trademarks and Patents Teams and Customers Technical Support We Offer We will provide you with: LFT & LFRT material technical parameters and leading-edge design Mold front design and recommendations Technical support for injection molding and extrusion molding

HDPE & Long Glass Fiber Overview body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; } h2 { font-size: 24px; color: #339933; margin-top: 30px; } p { font-size: 18px; } ul { font-size: 18px; margin-left: 20px; } img { max-width: 100%; margin-top: 15px; margin-bottom: 15px; } HDPE High-density polyethylene (HDPE) is a granular product that is non-toxic and odorless. It has a crystallinity of 80%–90%, a softening point of 125–135℃, and can be used up to 100℃. Compared to low-density polyethylene, HDPE has better hardness, tensile strength, and creep resistance. It also offers superior wear resistance, electrical insulation, toughness, and cold resistance. HDPE has excellent chemical stability—it is insoluble in organic solvents at room temperature and resistant to acids, alkalis, and various salts. Long Glass Fiber Glass fiber reinforced plastics (GFRP) are made by adding glass fibers and other additives to pure plastics, which significantly extends the material’s application range. These reinforced materials are commonly used for structural parts in products made from PP, ABS, PA66, PA6, HDPE, PPA, TPU, PEEK, PBT, PPS, and others. Advantages High heat resistance: Glass fiber is heat resistant, so reinforced plastics can withstand much higher temperatures, especially nylon-based plastics. Reduced shrinkage and improved rigidity: Glass fiber restricts polymer chain movement, decreasing shrinkage and significantly improving rigidity. Improved impact resistance: Reinforced plastics resist stress cracking and have much higher impact strength. Enhanced mechanical strength: Tensile strength, compressive strength, and bending strength are greatly improved. Flame retardancy: Addition of glass fiber and other additives reduces combustibility; most reinforced plastics cannot be ignited. Datasheet Contact Us

ABS & Long Glass Fiber Compounds body { font-family: Arial, sans-serif; color: #333; line-height: 1.6; } h2 { font-size: 24px; color: #339933; margin-top: 30px; } h3 { font-size: 20px; color: #339933; margin-top: 20px; } p, ul { font-size: 18px; } ul { margin-left: 20px; } table { width: 100%; border-collapse: collapse; margin-top: 15px; margin-bottom: 15px; } table, th, td { border: 1px solid #000; } th, td { text-align: center; padding: 5px; font-size: 18px; } img { max-width: 100%; margin-top: 15px; margin-bottom: 15px; } What is ABS material? ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic polymer structural material with high strength, good toughness, and easy machinability. ABS appears as opaque ivory grains, but products can be colored and have a high gloss finish. Why fill with Long Glass Fiber? Long fiber reinforced thermoplastics (LFT & LFRT) differ from conventional short fiber reinforced thermoplastics. Short fibers are usually 1–2 mm long, while long fiber processes maintain lengths of 5–25 mm. The long fiber is impregnated with a special resin system, cut to desired lengths, and can be used in injection molding, extrusion, and other applications. This enables direct replacement of steel and thermoset products. Advantages of ABS filling Long Glass Fiber Compounds Glass fiber is heat resistant, increasing the heat resistance of reinforced plastics, especially for nylon plastics. Reduces shrinkage and greatly improves rigidity by limiting polymer chain movement. Prevents stress cracking and significantly improves impact resistance. Enhances mechanical strength, including tensile, compressive, and bending strength. Flame retardancy: Most reinforced plastics cannot ignite due to added fibers and additives. Datasheet for Reference Applications of ABS Filling Long Glass Fiber Compounds Mainly used in load-bearing and structural parts. Product Details Number Length Color MOQ Package Sample Delivery Time Port of Loading ABS-NA-LGF30 5–25 mm Original color (customizable) 25 kg 25 kg/bag Available 7–15 days after shipment Xiamen Port Our Company Our Teams & Customers We Offer You LFT & LFRT material technical parameters and leading-edge design. Mold front design and recommendations. Technical support for injection molding and extrusion molding. Contact Way Ms. Wallis Email: sale02@lfrtplastic.com Whatsapp: (+86) 13950095727 WeChat: 13950095727