PPS is a high-performance, tough engineering plastic with great dimensional and thermal stability, as well as a wide operating temperature range of up to 260 °C and good chemical resistance. Moreover, PPS, like most other thermoplastics, is an electrical insulator. Its ability to be used at high temperatures coupled with its thermal stability makes PPS great for applications such as semiconductor components in machinery, bearings, and valve seats.

MXD6 Plastic | Long Glass Fiber Reinforced MXD6 (MXD6-LGF) What is MXD6? Polyadipyl-m-benzoylamine, commonly referred to as MXD6 or nylon MXD6, is a high-performance engineering thermoplastic. Compared to other engineering plastics, MXD6 has higher mechanical strength and modulus. It is also a special high barrier nylon, with excellent resistance to oxygen and carbon dioxide. Unlike PVDC or EVOH, its barrier performance is not affected by temperature or humidity, making MXD6 ideal for high-temperature and humid conditions. Structural and Mechanical Performance MXD6 nylon exhibits high strength, high rigidity, high thermal deformation temperature, low thermal expansion, excellent dimensional stability, and low water absorption. Its mechanical properties change minimally after water absorption. MXD6 has low shrinkage for precision forming, excellent paintability at high temperatures, and outstanding barrier properties. Advantages of MXD6 Maintains high strength and rigidity over a wide temperature range High heat deflection temperature with low thermal expansion coefficient Low water absorption and minimal mechanical property reduction Small molding shrinkage, suitable for precision molding processes Excellent paintability, especially at high temperatures Outstanding barrier to oxygen, carbon dioxide, and other gases MXD6-LGF | Long Glass Fiber Reinforced MXD6 MXD6 can be compounded with long glass fibers, carbon fibers, minerals, and advanced fillers to produce composites with 50-60% glass fiber reinforcement. This results in exceptional strength and stiffness while maintaining a smooth, resin-rich surface ideal for painting, metal coating, or reflective housings. Key Advantages of MXD6-LGF High fluidity for thin walls: Can fill walls as thin as 0.5 mm even with 60% glass fiber content. Excellent surface finish: Resin-rich surfaces provide high gloss appearance despite high fiber content. Very high strength and stiffness: Comparable to many cast metals and alloys with 50-60% glass fiber. Good dimensional stability: Low shrinkage and tight tolerances; coefficient of linear expansion similar to many metals. MXD6-LGF TDS (Technical Data Sheet) Applications of MXD6-LGF MXD6-LGF replaces metals for high-quality structural parts in automotive, electronics, and electrical appliances. It performs well in environments requiring high mechanical strength and oil resistance, operating at 120–160℃ long-term. With glass fiber reinforcement, MXD6 maintains heat resistance up to 225℃, suitable for cylinder blocks, cylinder heads, pistons, and synchronous gears of automotive engines. MXD6/PPO alloys offer high temperature resistance, high strength, wear resistance, oil resistance, and excellent dimensional stability, enabling metal replacement in automotive body panels, fenders, wheel covers, and complex curved parts. About Us

Long Carbon Fiber Carbon fiber exhibits outstanding properties, including extremely high axial strength and modulus, low density, and excellent specific performance. It shows no creep, outstanding fatigue resistance, excellent corrosion resistance, and maintains stability at very high temperatures in non-oxidizing environments. Carbon fiber also features good electrical and thermal conductivity, effective electromagnetic shielding, a low coefficient of thermal expansion, and strong anisotropy. Compared with traditional glass fiber, carbon fiber offers more than three times the Young’s modulus and approximately twice the modulus of aramid (Kevlar) fiber. It is insoluble and does not swell in organic solvents, acids, or alkalis, making it highly suitable for corrosive and demanding environments. One effective way to reduce the cost of carbon fiber applications is to combine it with engineering plastics such as nylon, creating high-performance composite materials with optimized cost-performance balance. As a result, carbon fiber reinforced nylon has become an important material system in modern composite engineering. Nylon itself is a high-performance engineering plastic, but it suffers from moisture absorption, limited dimensional stability, and mechanical properties far below those of metals. To overcome these limitations, fiber reinforcement has been applied since the 1970s. Carbon fiber reinforced nylon significantly improves strength, stiffness, thermal stability, creep resistance, wear resistance, and dimensional accuracy. Compared with glass fiber reinforced nylon, carbon fiber reinforced nylon offers superior damping behavior and overall mechanical performance. Therefore, carbon fiber reinforced nylon (CF/PA) composites have developed rapidly in recent years. In particular, for additive manufacturing, SLS (Selective Laser Sintering) technology is considered one of the most suitable methods for processing carbon fiber reinforced nylon materials. TDS for Reference Applications Our Company Xiamen LFT Composite Plastic Co., Ltd. is a professional manufacturer specializing in Long Fiber Reinforced Thermoplastics (LFT & LFRT), including Long Glass Fiber (LGF) and Long Carbon Fiber (LCF) series. Our LFT materials are suitable for LFT-G injection molding, extrusion processes, and LFT-D compression molding. Fiber length can be customized from 5 to 25 mm according to customer requirements. Our continuous fiber impregnation technology has passed ISO 9001 and IATF 16949 certification, and our products are protected by multiple trademarks and patents.

PA6 Long Carbon Fiber Composite body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; background-color: #f0f0f0; padding: 10px; color: #339933; } p { margin: 10px 0; } ul { margin: 10px 0 10px 20px; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } Polyamide 6 (PA6) Nylon 6 (PA6) is a general engineering plastic with lightweight, wear resistance, corrosion resistance, and good toughness. As a thermoplastic resin, it softens when heated and hardens when cooled, allowing repeated processing. Long Carbon Fiber Carbon fiber has high strength, high modulus, large specific surface area, and high electrical conductivity. Compared with glass fiber, carbon fiber provides maximum strength along the fiber direction. Carbon fiber reinforced composites are stronger than polymer matrix materials while maintaining light weight, gradually replacing traditional metals in electronics, electric vehicles, medical devices, industrial equipment, and sports/leisure products. LCF VS SCF Advantages of Long Carbon Fiber Filled High strength and high toughness Small coefficient of thermal expansion Low hardness and light weight Corrosion resistance and aging resistance Temperature resistance TDS of PA6 for Reference Application of PA6 Suitable for manufacturing helmets, car bumpers, treadmills, etc. Certifications Factory & Warehouse Teams & Customers About Us Xiamen LFT Composite Plastic Co., Ltd is a brand-name company focusing on LFT & LFRT: Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). Our thermoplastic LFT materials can be used for LFT-G injection molding, extrusion, and LFT-D molding. Fiber lengths can be customized from 5~25mm. Our continuous infiltration reinforced thermoplastics have passed ISO9001 & IATF16949 certification, and products hold multiple national trademarks and patents.

ABS & Long Glass Fiber Compounds body { font-family: Arial, sans-serif; color: #333; line-height: 1.6; } h2 { font-size: 24px; color: #339933; margin-top: 30px; } h3 { font-size: 20px; color: #339933; margin-top: 20px; } p, ul { font-size: 18px; } ul { margin-left: 20px; } table { width: 100%; border-collapse: collapse; margin-top: 15px; margin-bottom: 15px; } table, th, td { border: 1px solid #000; } th, td { text-align: center; padding: 5px; font-size: 18px; } img { max-width: 100%; margin-top: 15px; margin-bottom: 15px; } What is ABS material? ABS (Acrylonitrile Butadiene Styrene) is a thermoplastic polymer structural material with high strength, good toughness, and easy machinability. ABS appears as opaque ivory grains, but products can be colored and have a high gloss finish. Why fill with Long Glass Fiber? Long fiber reinforced thermoplastics (LFT & LFRT) differ from conventional short fiber reinforced thermoplastics. Short fibers are usually 1–2 mm long, while long fiber processes maintain lengths of 5–25 mm. The long fiber is impregnated with a special resin system, cut to desired lengths, and can be used in injection molding, extrusion, and other applications. This enables direct replacement of steel and thermoset products. Advantages of ABS filling Long Glass Fiber Compounds Glass fiber is heat resistant, increasing the heat resistance of reinforced plastics, especially for nylon plastics. Reduces shrinkage and greatly improves rigidity by limiting polymer chain movement. Prevents stress cracking and significantly improves impact resistance. Enhances mechanical strength, including tensile, compressive, and bending strength. Flame retardancy: Most reinforced plastics cannot ignite due to added fibers and additives. Datasheet for Reference Applications of ABS Filling Long Glass Fiber Compounds Mainly used in load-bearing and structural parts. Product Details Number Length Color MOQ Package Sample Delivery Time Port of Loading ABS-NA-LGF30 5–25 mm Original color (customizable) 25 kg 25 kg/bag Available 7–15 days after shipment Xiamen Port Our Company Our Teams & Customers We Offer You LFT & LFRT material technical parameters and leading-edge design. Mold front design and recommendations. Technical support for injection molding and extrusion molding. Contact Way Ms. Wallis Email: sale02@lfrtplastic.com Whatsapp: (+86) 13950095727 WeChat: 13950095727

Known for its dimensional stability, low moisture absorption, high strength, stiffness, and chemical, UV, and thermal resistance.

What is PA66? PA66 (Polyamide 66), also known as Nylon 66, is a semi-crystalline thermoplastic widely used in automotive, electrical, electronic, and industrial applications. It offers excellent mechanical strength, wear resistance, and thermal stability. What is PA66-LGF? PA66-LGF (Long Glass Fiber Reinforced Nylon 66) is a modified engineering plastic made by reinforcing PA66 with long glass fibers. This significantly improves mechanical performance, dimensional stability, and heat resistance. Compared with unfilled PA66, LGF-reinforced PA66 offers: Higher strength and stiffness Improved dimensional stability (low warpage and shrinkage) Better fatigue and creep resistance Reduced water absorption impact on properties Material Characteristics High mechanical strength and rigidity Excellent heat resistance and wear resistance Good chemical resistance (oils, fuels, greases) Low friction and self-lubricating properties Stable performance under humid and variable environments Applications 1. Automotive Industry Used in engine covers, intake systems, cooling components, interior and structural parts such as dashboards, door handles, and brackets. 2. Electrical & Electronics Applied in connectors, switches, insulation parts, housings, and electrical components requiring flame resistance and dimensional stability. 3. Industrial & Machinery Suitable for gears, bearings, fasteners, conveyor parts, and structural mechanical components requiring high strength and durability. Product Specification ItemSpecification GradePA66-LGF30 Fiber Length12 mm ColorNatural / Customized MOQ25 kg Packaging25 kg/bag Delivery Time7–15 days PortXiamen Port FAQ 1. Is higher glass fiber content always better? Not necessarily. The optimal fiber content depends on application requirements such as strength, toughness, and surface quality. 2. Can LGF materials be used for appearance parts? Yes, but surface quality must be evaluated based on product design and mold conditions. 3. How to choose reinforcement length? Selection depends on required mechanical performance and final application conditions. Supplier Information Xiamen LFT Composite Plastic Co., Ltd specializes in long fiber reinforced thermoplastics (LFT-G / LFT-D), including PP, PA6, PA66, PPA, PBT, TPU, and other engineering materials. We provide customized solutions for automotive, electronics, and industrial applications.

PA6 Long Carbon Fiber Reinforced Thermoplastic High-performance PA6 reinforced with long carbon fiber (LCF) combines lightweight properties, superior mechanical strength, dimensional stability, and outstanding durability for demanding industrial applications. Polyamide 6 (PA6) Nylon 6 (PA6) is a widely used engineering plastic known for its lightweight structure, excellent wear resistance, corrosion resistance, and high toughness. As a thermoplastic resin, PA6 can be repeatedly softened by heating and hardened by cooling, making it highly suitable for repeated processing and molding applications. Long Carbon Fiber (LCF) Carbon fiber features high strength, high modulus, excellent electrical conductivity, and an outstanding strength-to-weight ratio. Compared with traditional glass fiber, carbon fiber provides superior mechanical performance while maintaining lightweight characteristics. Long carbon fiber reinforced thermoplastics are increasingly replacing traditional metal materials in industries such as electric vehicles, electronics, industrial equipment, medical devices, and sports products. LCF vs SCF Long carbon fiber (LCF) reinforced materials provide better impact resistance, fatigue performance, and structural integrity compared with short carbon fiber (SCF) materials. Advantages of Long Carbon Fiber Reinforcement High Strength Excellent mechanical performance with outstanding toughness and durability. Lightweight Lower density compared with traditional metal materials. Thermal Stability Low thermal expansion coefficient and excellent heat resistance. Corrosion Resistance Outstanding resistance to chemicals, aging, and environmental exposure. TDS of PA6 for Reference Applications of PA6-LCF PA6 reinforced with long carbon fiber is widely used in structural and lightweight applications requiring high strength and impact resistance. Helmets Automotive bumpers Treadmills and sports equipment Industrial machinery parts Electric vehicle components Consumer electronics Certifications Factory & Warehouse Teams & Customers About Us Xiamen LFT Composite Plastic Co., Ltd. is a professional manufacturer specializing in Long Fiber Reinforced Thermoplastics (LFT & LFRT), including Long Glass Fiber (LGF) and Long Carbon Fiber (LCF) series materials. Our thermoplastic materials are suitable for injection molding, extrusion, and LFT-D molding applications. Fiber length can be customized from 5mm to 25mm according to customer requirements. The company has passed ISO9001 and IATF16949 certifications, and our products have obtained multiple patents and trademarks.

.lft-wrap{ font-family:Arial,Helvetica,sans-serif; color:#555; line-height:1.8; font-size:14px; max-width:1100px; margin:0 auto; } .lft-wrap h2{ font-size:26px; color:#2E8B57; margin-top:40px; margin-bottom:15px; border-left:5px solid #2E8B57; padding-left:12px; } .lft-wrap p{ margin:12px 0; } .lft-wrap ul{ margin:10px 0 15px 25px; } .lft-wrap li{ margin-bottom:8px; } .lft-wrap img{ max-width:100%; border-radius:8px; margin-top:15px; } .lft-note{ background:#f8fff8; border:1px solid #d8ead8; padding:18px; border-radius:8px; margin-top:20px; } .lft-cta{ background:#f8fff8; border:1px solid #d6edd6; border-radius:10px; padding:25px; margin-top:35px; text-align:center; } .lft-btn{ display:inline-block; background:#2E8B57; color:#fff !important; text-decoration:none; padding:12px 28px; border-radius:30px; margin-top:15px; font-weight:bold; } .lft-btn:hover{ background:#246b45; } What is TPU? TPU (Thermoplastic Polyurethane) is a high-performance elastomer material that combines the elasticity of rubber with the processing advantages of thermoplastics. TPU is mainly divided into polyester-based and polyether-based types, with a wide hardness range from 60HA to 85HD. It offers excellent: Wear resistance Oil resistance Elasticity and flexibility Transparency Low-temperature performance Environmental friendliness TPU materials are widely used in consumer products, sports equipment, power tools, automotive parts, cables, and industrial components. As a thermoplastic elastomer, TPU can be repeatedly heated and processed without significant chemical crosslinking, making it suitable for injection molding and extrusion applications. Why Reinforce TPU with Long Glass Fiber? Long glass fiber reinforced TPU composites provide a highly efficient solution when conventional reinforced plastics cannot meet structural performance requirements. By forming a three-dimensional internal fiber skeleton network, long glass fibers significantly improve: Mechanical strength Dimensional stability Fatigue resistance Impact resistance Durability in harsh environments Metal replacement capability Long glass fiber reinforced TPU materials help reduce product weight while maintaining excellent structural performance and long-term durability. Compared with Short Glass Fiber Compared with short glass fiber reinforced materials, long glass fiber composites provide superior load transfer efficiency, better impact resistance, and improved fatigue performance due to the longer retained fiber structure inside the material. Applications TPU-LGF materials are widely used in industries requiring flexibility, durability, and structural strength. Automotive door and window components Safety toe caps Mechanical structural parts Pneumatic nail gun housings Professional power tools Industrial connectors and fasteners Wear-resistant engineering components Our engineering team can recommend suitable TPU-LGF grades according to your processing method and performance requirements. About Xiamen LFT Composite Plastic Co., Ltd. Xiamen LFT Composite Plastic Co., Ltd. specializes in long fiber reinforced thermoplastic materials (LFT & LFRT), including Long Glass Fiber (LGF) and Long Carbon Fiber (LCF) reinforced composites. Our materials are suitable for: LFT-G injection molding Extrusion molding LFT-D direct molding processes Customized pellet lengths from 5–25 mm are available according to customer requirements. The company has passed ISO9001 & IATF16949 quality management certifications and owns multiple national patents and trademarks. Certifications & Quality Assurance ISO9001 & IATF16949 Quality Management Certification National Laboratory Accreditation Modified Plastics Innovation Enterprise REACH & ROHS Compliance Testing Multiple National Patents & Trademarks Need Technical Support or Material Recommendations? Contact us for datasheets, samples, processing guidance, and customized TPU-LGF material solutions. Contact Us

Long carbon fiber Carbon fiber has many excellent properties, high axial strength and modulus, low density, high specific performance, no creep, super high temperature resistance in non-oxidizing environment, good fatigue resistance, specific heat and electrical conductivity between non-metal and metal, small coefficient of thermal expansion and anisotropy, good corrosion resistance, good X-ray transmission. Good electrical and thermal conductivity, good electromagnetic shielding, etc. Compared with traditional glass fiber, carbon fiber has more than 3 times of Young's modulus; it is about 2 times of Young's modulus compared with Kevlar fiber, which is insoluble and swollen in organic solvents, acids and alkalis, and has outstanding corrosion resistance. But is there a way to reduce the price of carbon fiber? That is to mix it with relatively cheap nylon material to form a composite material with good performance and meet the requirements. In that case, there is no doubt that carbon fiber nylon will definitely have a place in the composite material. Nylon itself is an engineering plastic with excellent performance, but moisture absorption, poor dimensional stability of products. Strength and hardness are also far from metal. In order to overcome these shortcomings, as early as before the 70s. People have used carbon fiber or other varieties of fibers for reinforcement to improve its performance. Carbon fiber reinforced nylon materials have developed rapidly in recent years, because nylon and carbon fiber are excellent performance in the field of engineering plastics materials, its compound material synthesis reflects the superiority of the two, such as strength and rigidity than unreinforced nylon is much higher, high temperature creep is small, thermal stability has improved significantly, good dimensional accuracy, wear resistance. Excellent damping, compared with glass fiber reinforced has better performance. Therefore, carbon fiber reinforced nylon (CF / PA) composites have developed rapidly in recent years. And for 3D printing using SLS technology is the most suitable technical means to achieve carbon fiber reinforced nylon. TDS for reference Application Our company Xiamen LFT composite plastic Co., Ltd is a brand-name company that focuses on LFT&LFRT. Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). The company's thermoplastic LFT can be used for LFT-G injection molding and extrusion, and can also be used for LFT-D molding. It can be produced according to customer requirements: 5~25mm in length. The company's continuous infiltration reinforced thermoplastics have passed ISO9001&16949 system certification,  and the products have obtained lots of national trademarks and patents.