Adding glass fiber to PBT is a commonly used method to enhance and modify PBT. The bonding force between glass fiber and PBT resin is good. After adding a certain amount of glass fiber to PBT resin, it can not only maintain the original advantages of PBT resin such as chemical resistance and processability, but also greatly improve its mechanical properties and overcome the problems. PBT resin notch sensitivity.

After adding glass fiber to ABS, the rigidity, heat resistance and dimensional stability of the composite are significantly improved. In addition, the cost performance of ABS plus glass fiber is extremely good, which can meet the needs of manufacturers while reducing costs.

Grade: General grade, Heat-resistant grade, UV-resistant grade, Toughen resistant grade Fiber specification: 20%-70% Product application: Industrial products, Household appliances, Automotive components and so on.

PLA Plastic PLA (polylactic acid) is a bio-based polyester and one of the most promising "green plastics" due to its biodegradability, biocompatibility, and high mechanical strength. PLA products can fully degrade into CO₂ and water via microorganisms, and are non-toxic and non-irritating. Mechanically, PLA is comparable to polypropylene, while its gloss, clarity, and processability resemble polystyrene. Its lower processing temperature allows production via injection molding, extrusion, blow molding, spinning, and other common plastic processing methods. PLA is widely applied in disposable plastics, packaging, fibers, nonwovens, chemical, medical, pharmaceutical, and 3D printing industries. PLA is increasingly recognized as a key material to reduce plastic pollution. PLA Reinforced Plastic Glass fiber (fiberglass) is an inorganic material with excellent insulation, heat resistance, corrosion resistance, and high mechanical strength. It is widely used to reinforce composite materials. Long glass fibers are typically over 10mm in length. Long Glass Fiber Reinforced PLA (LGFPLA) contains 10–25mm glass fibers forming a 3D structure during molding. It belongs to long fiber thermoplastics (LFT). Pellet sizes are generally 12mm (injection molding) or 25mm (compression molding). Glass fiber content ranges from 20% to 60%, and colors can be customized. LGF & SGF Advantages Compared with short fiber reinforced thermoplastics, LFT has: Longer fiber length for superior mechanical properties High specific stiffness and strength, excellent impact resistance, ideal for automotive parts Improved creep resistance, dimensional stability, and high precision in molding Excellent fatigue resistance Better stability in high temperature and humid environments Minimal fiber damage during molding due to fiber mobility Technical Details Number Color Length Fiber Content Package Sample Port of Loading Delivery Time PLA-NA-LGF Natural or customized 6-25mm 20%-60% 25kg/bag Available Xiamen Port 7-15 days after shipment Lab & Factory Xiamen LFT Composite Plastic Co., Ltd. Xiamen LFT Composite Plastic Co., Ltd., founded by a thermoplastic composite industry veteran, specializes in the development and production of long glass/carbon fiber reinforced thermoplastic plastics (LFT-G, LFRT, LFT). Our products are lightweight, high-strength, impact- and heat-resistant, recyclable, and eco-friendly. Compared to traditional materials, they offer better corrosion resistance, lower cost, and superior molding performance. Our LFT series (LGF & LCF) include PP, PA6, PA66, PPA, PA12, TPU, PBT, PLA, PET, PPS, and PEEK. Applications cover home appliances, aerospace, automotive, military, and medical equipment, as well as sports goods and daily necessities. Products include gears, rollers, pulleys, pump impellers, fan blades, and more.

Product number: PA12-NA-LGF Fiber specification: 20%-60% Product feature: High strength, High toughness and durability Product application: Suitable for automotive, sports parts, solar energy, photovoltaic industry and other industries.

Fiber-reinforced PPA has high temperature resistance, high strength and low density, so it is considered the best resin to replace steel with plastic in the future. It can be used in many industrial and civil fields, including automobiles, equipment, entertainment, food processing, communications, electronics and electrical , power tools, gardening, etc.

PP Material & LFT Solutions body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; background-color: #CCCCCC; padding: 10px; } h3 { font-size: 20px; margin-top: 20px; } p { margin: 10px 0; } .highlight { background-color: #FFFF99; color: #333; padding: 5px; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } ul { margin: 10px 0 10px 20px; } PP Material PP is a polymer made of propylene as monomer by coordination polymerization, and is one of the five major general-purpose plastics: PE, PP, PVC, PS, and ABS. Key Properties: Colorless, tasteless, non-toxic; can meet FDA and other food-grade material requirements when unadded. Due to crystalline nature, the original color is milky white translucent with better transparency than PE. Low specific gravity of 0.9, making it one of the lightest plastics compared to water. Good toughness, especially repeated bending resistance, commonly known as “100-fold rubber”. Better heat resistance than PE, up to 120°C. Good resistance to hydrolysis; can be sterilized by high-temperature steam. Excellent chemical resistance, particularly to acids; suitable for storing concentrated sulfuric acid. Outdoor use is susceptible to light, UV, and aging. Modified PP Material By filling PP with carbon fiber, the rigidity and modulus are increased, reducing deformation caused by shrinkage. However, toughness decreases. Adding anti-UV or anti-aging agents improves outdoor performance, and adding flame retardant materials improves fire resistance. TDS for Reference Only SGF vs LGF Long Carbon Fiber Specification Application Product Processing We Will Offer You LFT & LFRT material technical parameters and leading-edge design Mold front design and recommendations Technical support for injection molding and extrusion molding

PA6 Long Carbon Fiber Composite body { font-family: Arial, sans-serif; line-height: 1.6; color: #333; margin: 20px; } h2 { font-size: 24px; background-color: #f0f0f0; padding: 10px; color: #339933; } p { margin: 10px 0; } ul { margin: 10px 0 10px 20px; } img { max-width: 100%; height: auto; display: block; margin: 10px 0; } Polyamide 6 (PA6) Nylon 6 (PA6) is a general engineering plastic with lightweight, wear resistance, corrosion resistance, and good toughness. As a thermoplastic resin, it softens when heated and hardens when cooled, allowing repeated processing. Long Carbon Fiber Carbon fiber has high strength, high modulus, large specific surface area, and high electrical conductivity. Compared with glass fiber, carbon fiber provides maximum strength along the fiber direction. Carbon fiber reinforced composites are stronger than polymer matrix materials while maintaining light weight, gradually replacing traditional metals in electronics, electric vehicles, medical devices, industrial equipment, and sports/leisure products. LCF VS SCF Advantages of Long Carbon Fiber Filled High strength and high toughness Small coefficient of thermal expansion Low hardness and light weight Corrosion resistance and aging resistance Temperature resistance TDS of PA6 for Reference Application of PA6 Suitable for manufacturing helmets, car bumpers, treadmills, etc. Certifications Factory & Warehouse Teams & Customers About Us Xiamen LFT Composite Plastic Co., Ltd is a brand-name company focusing on LFT & LFRT: Long Glass Fiber Series (LGF) & Long Carbon Fiber Series (LCF). Our thermoplastic LFT materials can be used for LFT-G injection molding, extrusion, and LFT-D molding. Fiber lengths can be customized from 5~25mm. Our continuous infiltration reinforced thermoplastics have passed ISO9001 & IATF16949 certification, and products hold multiple national trademarks and patents.