The following are the mold parameters and matters needing attention in the injection molding process of TPU:
Material Grade |
Rear Zone ℃ |
Center Zone ℃ |
Front Zone℃ |
Nozzle℃ |
Melt Temp℃ |
Mold℃ |
All LFT TPU Products |
210-240
|
210-240 |
215-245 |
210-245 |
210-240 |
85-100 |
Dry to 0.1% moisture prior to molding
2.Attention
Please Note:
Processing temperatures shown are generally for 30-60% fiber content materials.
Lower temperatures should be used for lower fiber content
Most all LFT-G materials will suffer discoloration if overdried
Contact:+86 139 5009 5727
Email:sale02@lfrtplastic.com
Web:www.lft-g.com